Material handling hire moves pallets, packs and building materials around warehouses, yards and construction sites. The main choices are counterbalance forklifts, rough-terrain forklifts, telehandlers (telescopic handlers) and powered pallet equipment.
Capacity must be read at the actual load centre and lift height, not just the headline tonnage. A forklift rated at 2.5 tonnes with a 500 mm load centre will carry less if the load is long, off-centre or lifted to full mast height.
Telehandlers combine reach and lift and can take forks, buckets, jibs and work platforms. On construction and solar sites they often replace a small crane and a loader, but their configuration determines the licence and inspection requirements.
Material handling classes and sizes
The table below lists the classes of forklifts and telehandlers most commonly available for hire in Australia. Exact specifications vary by make and model—confirm dimensions, weight and capacity with the supplier before booking.
| Class | Size / spec | Typical jobs |
|---|---|---|
| Walkie / pallet stacker | 1–2 t | Warehouse pallet moves and low stacking |
| Counterbalance forklift | 1.8–5 t · LPG/electric/diesel | Warehouses, yards, loading trucks |
| Container forklift | 2.5–3 t · container mast | Unpacking shipping containers |
| Rough-terrain forklift | 2.5–5 t · 4WD | Building sites, timber yards, uneven ground |
| Telehandler | 7–18 m reach · 3–5 t | Placing materials at height, site logistics, solar farms |
| Order picker | Operator-up | High-bay warehouse picking |
How to choose the right machine
Weigh the load and measure it
Give the heaviest load, its dimensions and how high it must go. Long or bulky loads move the load centre and reduce safe capacity.
Choose fuel for the environment
Electric suits indoor and food environments; LPG is common in warehouses; diesel suits outdoor and rough-terrain work.
Check the surface
Counterbalance forklifts need firm, level surfaces. Gravel, mud or slopes call for rough-terrain forklifts or telehandlers.
Confirm attachments
Fork extensions, side shift, jibs, buckets, rotators and man-cages all change capacity. Ask for the load chart with the attachment fitted.
Licences, tickets and compliance
- Forklifts require an LF High Risk Work Licence; order pickers require an LO licence.
- Telehandlers do not require a forklift licence when used with forks, but when configured for crane-type duties (jib or hook) a crane licence may apply—confirm with your state regulator.
- Work platforms fitted to forklifts or telehandlers must be designed for the machine and used only as the manufacturer allows.
See our plant licences and tickets guide for the full list of High Risk Work Licence classes.
What drives the cost
The hire rate is only part of the total. On short hires these items often add 20–50% to the bill—ask every supplier to quote them the same way:
- Weekly and monthly rates versus short daily hire
- LPG bottles or battery charging arrangements
- Attachments and load-chart specific configurations
- Delivery on a tilt tray or crane truck
- Operator supply for telehandlers on construction sites
For indicative 2026 rates, see the plant hire cost guide.
Where it fits in a project
- Open a solar farm workfront — Build access, distribute materials and support piling across long internal routes and changing ground.