Apartment and commercial fit-outs keep large scissor and boom fleets busy; many CBD loading docks limit machine height and weight. 8 listed suppliers are based in Melbourne or service Victoria.
What drives demand in Melbourne
- Metro Tunnel, level crossings and North East Link
- Apartment and high-rise construction
- Industrial estates in the west and south-east
- Growth-corridor subdivisions
Melbourne's building, rail, road, utilities, logistics and industrial programmes require equipment suited to dense urban sites and expanding outer corridors. Suppliers servicing Melbourne commonly also cover Dandenong, Werribee, Epping, Sunshine.
Site conditions in Melbourne
Basalt and reactive clays in the west and north; sand in the south-east; dense inner-city sites. Plan for restricted delivery windows, road permits, overhead services and limited setup or unloading space.
Winter rain softens clay sites; plan hardstand, track mats and extra standby from June to September.
Machines commonly hired in Melbourne
| Class | Size / spec | Typical jobs |
|---|---|---|
| Vertical personnel lift | 4–8 m platform | Single-person indoor maintenance and fit-out |
| Electric scissor lift | 19–40 ft | Ceilings, services, fit-out on slab |
| Rough-terrain scissor | 26–53 ft | Construction sites, cladding and external works |
| Knuckle boom | 34–80 ft | Up-and-over access, roof edges, structural steel |
| Stick boom | 40–185 ft | Maximum outreach on façades, tanks and industrial sites |
| Spider / tracked lift | 13–50 m | Narrow access, trees, atriums, delicate floors |
| Truck-mounted EWP | 12–30 m | Roadside, signage, lighting and utility maintenance |
Brief the supplier properly
Work out working height and outreach
Working height is roughly platform height plus 2 metres. If you must reach over a roof edge, awning or plant, you need a boom with enough outreach—not just height.
Check the floor and ground
Suspended slabs, mezzanines and pavers have load limits. Ask for the machine's wheel or point load and compare it with engineering advice.
Measure doorways and ramps
Stowed width, height and weight decide whether a machine can get in. Lifts, ramps and door openings are common blockers indoors.
Plan rescue and exclusion zones
Have a rescue plan for a stranded or injured operator and set up exclusion zones below the platform, particularly near pedestrians.
For Melbourne specifically, tell the supplier the exact site address so they can confirm the depot the machine will come from, the travel or float charge and any VIC permit needs.
Licences and rules in VIC
- Boom-type EWPs with a boom length of 11 metres or more require a WP High Risk Work Licence.
- Scissor lifts, vertical lifts and booms under 11 metres do not need an HRWL, but operators must be trained and familiar with the model; an EWPA Yellow Card is widely requested on commercial sites.
- Harnesses and lanyards attached to the anchor point are required in boom lifts. EWPs must have current annual inspections, and 10-year major inspections for booms.
- WHS regulator for Melbourne: WorkSafe Victoria. Oversize transport: Oversize and overmass permits are issued through the NHVR, with VicRoads/DTP and council consent where required.
What drives the cost in Melbourne
- Delivery and collection—often priced per trip by truck size
- Weekly and monthly rates are much cheaper per day than daily hire
- Diesel versus battery (charging access on site)
- Damage waiver and tyre damage on rough sites
- Operator supply for truck-mounted and large booms
- Distance from the supplier’s depot to your Melbourne site
See the plant hire cost guide for indicative 2026 rates.