Gas plant maintenance drives demand for large mine-spec booms. 6 listed suppliers are based in Karratha or service Western Australia.
What drives demand in Karratha
- LNG and gas facilities
- Iron ore and port works
- Town infrastructure
- Accommodation camps
Karratha is central to Pilbara resources, LNG, ports, civil construction and industrial shutdown work. Suppliers servicing Karratha commonly also cover Dampier, Roebourne, Wickham, Port Hedland.
Site conditions in Karratha
Pilbara coast with rock, red soils and cyclone exposure. Remote logistics, extreme heat, site specifications, accommodation and 24-hour support require early confirmation.
Cyclone season in the north runs November to April; summer heat across the interior affects machine cooling, operator fatigue and night-shift planning.
Machines commonly hired in Karratha
| Class | Size / spec | Typical jobs |
|---|---|---|
| Vertical personnel lift | 4–8 m platform | Single-person indoor maintenance and fit-out |
| Electric scissor lift | 19–40 ft | Ceilings, services, fit-out on slab |
| Rough-terrain scissor | 26–53 ft | Construction sites, cladding and external works |
| Knuckle boom | 34–80 ft | Up-and-over access, roof edges, structural steel |
| Stick boom | 40–185 ft | Maximum outreach on façades, tanks and industrial sites |
| Spider / tracked lift | 13–50 m | Narrow access, trees, atriums, delicate floors |
| Truck-mounted EWP | 12–30 m | Roadside, signage, lighting and utility maintenance |
Brief the supplier properly
Work out working height and outreach
Working height is roughly platform height plus 2 metres. If you must reach over a roof edge, awning or plant, you need a boom with enough outreach—not just height.
Check the floor and ground
Suspended slabs, mezzanines and pavers have load limits. Ask for the machine's wheel or point load and compare it with engineering advice.
Measure doorways and ramps
Stowed width, height and weight decide whether a machine can get in. Lifts, ramps and door openings are common blockers indoors.
Plan rescue and exclusion zones
Have a rescue plan for a stranded or injured operator and set up exclusion zones below the platform, particularly near pedestrians.
For Karratha specifically, tell the supplier the exact site address so they can confirm the depot the machine will come from, the travel or float charge and any WA permit needs.
Licences and rules in WA
- Boom-type EWPs with a boom length of 11 metres or more require a WP High Risk Work Licence.
- Scissor lifts, vertical lifts and booms under 11 metres do not need an HRWL, but operators must be trained and familiar with the model; an EWPA Yellow Card is widely requested on commercial sites.
- Harnesses and lanyards attached to the anchor point are required in boom lifts. EWPs must have current annual inspections, and 10-year major inspections for booms.
- WHS regulator for Karratha: WorkSafe WA (mining: Department of Energy, Mines, Industry Regulation and Safety). Oversize transport: WA is not part of the national heavy vehicle scheme. Oversize and overmass permits are issued by Main Roads WA Heavy Vehicle Services.
What drives the cost in Karratha
- Delivery and collection—often priced per trip by truck size
- Weekly and monthly rates are much cheaper per day than daily hire
- Diesel versus battery (charging access on site)
- Damage waiver and tyre damage on rough sites
- Operator supply for truck-mounted and large booms
- Distance from the supplier’s depot to your Karratha site
See the plant hire cost guide for indicative 2026 rates.