Log trucks and haulage compete for transport capacity. 5 listed suppliers are based in Burnie or service Tasmania.
What drives demand in Burnie
- Port works
- Manufacturing plant maintenance
- Forestry logistics
- Mining support
Burnie combines port, forestry, manufacturing, mining services, utilities and civil work across the north west. Suppliers servicing Burnie commonly also cover Wynyard, Somerset, Penguin, Devonport.
Site conditions in Burnie
North West Coast port city with steep terrain and high rainfall. Confirm industrial-site requirements, coastal conditions and support coverage for west-coast projects.
Wet, cold winters slow earthworks; specialist plant may need to cross Bass Strait, so book early.
Machines commonly hired in Burnie
| Class | Size / spec | Typical jobs |
|---|---|---|
| Small tipper | 3–6 t payload | Residential spoil, landscape supplies |
| Tandem / 10 m³ tipper | ~12–14 t payload | Civil spoil and quarry product |
| Truck and dog | ~30–38 t payload | High-volume haulage on longer runs |
| Water cart | 10–20 kL | Dust suppression, compaction moisture, road works |
| Tilt tray / beavertail | 8–15 t | Small plant, EWPs, containers |
| Low loader / float | 20–80 t + | Excavators, dozers, rollers and heavy plant |
Brief the supplier properly
Balance trucks to the loader
Estimate load time, haul time, tip time and return. Enough trucks to keep the excavator loading—no more—gives the lowest cost per cubic metre.
Confirm the tip site
Tip-site hours, material classification (clean fill, VENM, contaminated) and fees vary. Unclassified spoil can be refused.
Check site access and turning
Truck-and-dogs need space to turn and reverse. Confirm road limits, bridge and load restrictions and whether a traffic controller is needed at the gate.
Plan water sources
Water carts need a fill point. Confirm standpipe access, bore water, council permits and fill rates.
For Burnie specifically, tell the supplier the exact site address so they can confirm the depot the machine will come from, the travel or float charge and any TAS permit needs.
Licences and rules in TAS
- Drivers need the appropriate heavy vehicle licence class (MR, HR, HC or MC).
- Heavy vehicles operate under Chain of Responsibility obligations—loading, mass and fatigue compliance involve the site, not just the driver.
- Oversize/overmass permits are issued by the NHVR in most states; Western Australia (Main Roads WA) and the Northern Territory manage their own permits.
- WHS regulator for Burnie: WorkSafe Tasmania. Oversize transport: Oversize and overmass permits are issued through the NHVR, with Department of State Growth consent on state roads.
What drives the cost in Burnie
- Minimum hours and travel time from the depot
- Tip fees and spoil classification
- Permits, pilots and escorts for floats
- Waiting time at loader or tip
- Water source fees for water carts
- Distance from the supplier’s depot to your Burnie site
See the plant hire cost guide for indicative 2026 rates.